nano-TA2 software

Released Software

There are two versions of software which can be used with the NanoTA2 system. The original version was NanoTA software and the newest release of that software is version 2.2.4233. This software required the use of a hardware dongle. Following is a link which can allow you to download a new copy of this software if required.

New Version

A newer version of software, TA Studio, is also available for the NanoTA2. IMPORTANT to note is that on systems with a serial number earlier than #170 you are required to return the controller to Anasys Instruments for an upgrade of the controller before attempting to use.

TAStudiov2.2.4233 is available for download.

Date: August 2009, Version: 2.1

WARNING: The TA Studio software will not work with a NanoTA2 system with a serial number earlier than #170 unless the system has been upgraded by Anasys Instruments.

Once you’ve downloaded the file, unzip the folder and click on either of the setup files to launch it and it will automatically install or update the TA Studio software on your computer.

Once you start the TA Studio software, it will require that you update the firmware on the NanoTA2 controller. Follow the on screen prompts to accomplish this, making sure to power cycle the controller once the update is complete.

For brief highlights on the changes that have been incorporated into the new software, download

TN #11 SW Update ver1.6

or for more detailed information download the updated NanoTA2 manual.

Original Version

NanoTA_1-6-11.zip is available for download.

Date: June 2008, Version: 1.6.11

Once you’ve downloaded the file, unzip the folder and click on the setup file to launch it and it will automatically update the nano-TA software on your computer.

For information on the changes that have been incorporated into the new software, download TN #11 SW Update ver1.6